Parts & Accessories

The Ultimate in Rear Hydration Systems. The next generation of our world championship winning Carbon Wing adds extra user adjustability and saddle compatibility into a faster than ever package. - TWICE AS FAST: Extensive aero research offers nearly twice the time savings over previous generations. - INCREASED ADJUSTABILITY: From the carrier to the cage, all optimizing speed and bottle access. - INCREASED BOTTLE RETENTION: Cages re-positioned for optimum retention and easier access. - CARBON BEAM: Special proprietary layup helps reduce cage vibration. - WIDER COMPATIBILITY: Fits the widest range of saddle rails by mounting on the saddle's horizontal rail.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Highly adjustable stainless-steel carrier with three ways to dial in your fit. Includes our impressive gripping GORILLA cage. Designed to accommodate saddles with transition hooks. The DELTA series of saddle mounted carriers have the largest degree of adjustability of any rear carrier, allowing you to place your bottle in the aerodynamic “sweet-spot” directly behind the rider, minimizing drag and maximizing time gains, typically between 120 and 165 seconds over the course of a full distance triathlon.

XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

Upgrade your adventure with the TWIST Universal Connector + Universal Base. By combining the TWIST magnetic system you love with the Boa® Fit System, any bottle turns into a Fidlock bottle. Use this system to carry your hydration, energy bars, or even your speaker for some tunes on the go. With wide TPU cable ties, this universal frame adapter can be attached to any bicycle tube or item with a diameter of 28-62mm. TWIST Universal Connector with Boa - Compatible with all TWIST Bases - Can hold items with a diameter of up to 80mm/3.14in - Anti-slip inlay for strong hold TWIST Universal Base - Compatible with all TWIST Bottles - Compatible with tube diameter of 28-62mm/1.1-2.44in

Upgrade your adventure with the TWIST Universal Connector + Bike Base. By combining the TWIST magnetic system you love with the Boa® Fit System, any bottle turns into a Fidlock bottle. Use this system to carry your hydration, energy bars, or even your speaker for some tunes on the trail. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. TWIST Universal Connector with Boa - Compatible with all TWIST Bases - Can hold items with a diameter of up to 80mm/3.14in - Anti-slip inlay for strong hold TWIST Bike Base - Compatible with all TWIST Bottles

New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.

Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 38 x 19 x 6 cm / 15 x 7.5 x 2.5 in

- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

B-RAD Everywhere Base 3

This water bottle enclosure is designed to insulate and prevent water from freezing when riding in cold conditions. - Waterproof, 5.5mm neoprene construction with nylon lamination inside and outside - Includes: plastic cage, Allen key, screws and washers - Fits and encloses up to an average 20oz bottle and has enough room for a heat pack - Extended zipper pull for easy open close while riding with winter gloves - Reflective material on logo

B-RAD Everywhere Base 2

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

If your thread inserts are already blocked or your bike does not even have any, the TWIST products can be mounted to the bike with the TWIST uni base, the universal bottle holder. It can securely fastened with the aid of two zip ties. On the top tube, the down tube, or the saddle tube – the TWIST uni base can be attached anywhere on the frame. - Compatible with frame tubes with a width of 28-62 mm - Rubber back for frame protection - Compatible with all TWIST Bottles - Attach and detach with ease

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases

Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Bottle cage support for fitting on frames that don’t have specific fixing holes, or to increase the standard number of bottle cages. Compatible with tubes having diameter from 25 mm to 70 mm (from 1 to 2.8 inch)

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Profile Design bottle cage storage securely and conveniently uses your bottle cage as a cargo carrier. The screw-top, bottle-shaped containers carry necessities—whatever you need along the way.

XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

All metal cup made of 304 Stainless Steel.