Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Auto Racks

SeaSucker 15mm Fork Mount
Most decent mountain bikes these days come with 15mm through-axles up front. You have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 15/100mm fork mount. The 15mm fork mount is bolt-on, meant for riders who are always using their rack with their thru-axle bike. According to Seasucker's friend and MTB pro Macky Franklin: “The 15mm fork mount is perfect. So much steadier than using the adaptor.” If you’ve got a Boost front hub (15/110mm), make sure to get one of Seasucker's Boost Adapters (sold separately) to get the fit right.
SeaSucker 20mm Fork Mount
If you’re riding a 20/110mm front hub, you have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 20mm fork mount. The 20mm fork mount is bolt-on and is meant for riders who are always using their rack with their thru-axle bike.
SeaSucker Add-On Front Wheel Holder
Made to fit Seasucker's Bomber and Mini Bomber bike racks – just swap the Add-On Front Wheel Holder for one of the fork mounts, and now your front wheel doesn’t have to ride in the trunk anymore. Elongated entry slots for the skewer allow the wheel to rest on the platform of the rack, providing additional stability when driving. Made for standard road, cross and MTB wheels, but requires the MTB Plugs (sold separately) to hold a 15/100mm or 15/110mm (Boost) through-axle. Made from .25-inch powder-coated aluminum. Fits all SeaSucker fork-mount racks: Talon, Mini Bomber, Bomber, and Falcon.
SeaSucker Board Rack
How great would life be if you could drive to the beach every day and surf? With SeaSucker’s Board Rack, we can at least help you get the board there. Our rack attaches to the roof of just about any car with our super-strong 6-inch SeaSucker vacuum mounts. That means no clips, no bars, and no hassle. Pump the rack on and strap the board down – it’s that easy. This rack is made to carry up to two surf or paddle boards. The rack consists of two 31-inch Starboard bars; the front bar has four 6-inch vacuum mounts and the back two. Bar pads and 10-inch nylon cam-buckle straps are included.
SeaSucker Bomber 3-Bike Car Rack
Finally, an upright-bike carrier that’s easy to install and won’t damage your car! SeaSucker's Bomber bike rack features their incredibly strong vacuum mounts allowing you to temporarily and securely mount your bikes to the roof or trunk without the hassle of permanently attaching any hardware. SeaSuckers are non-marking, UV- and weather-resistant, and hold exceptionally well to glass, metal or fiberglass surfaces. They're made of 3/4-inch high-density polyethylene, which is tough and strong enough to hold your bikes and flexible enough to follow the curve of your roof line. The Bomber holds your bikes with 3 of their heavy-duty Delta Bike Hitch Pro fork mounts. They open wide enough when you release the lever that you don’t have to tighten or loosen the acorn nut on the opposite side every time you put your bike in or take your bike out of the mount. Plus, the Deltas lock, too. For the back of your bikes, and to keep the tails from sliding left or right, there are another 3 SeaSucker vacuum mounts with 6-inch, hook-and-loop Rear Wheel Straps. The Bomber attaches to your car via 5 6-inch diameter SeaSucker vacuum mounts (210 pound-rated pull strength each). It's designed to mount to your roof and front windshield, but can be used just about anywhere – on the roof, on the trunk, etc. It holds bikes up to 45 pounds each.
SeaSucker Boost Spacer
Boost front hubs exploded on the scene in 2015/2016 and SeaSucker needed a way to mount them to their 15mm Fork Mount. Lo and behold, this 15mm round, 10mm wide spacer they made works like a charm. Just insert your skewer through your fork and 15mm fork mount, then slip the spacer in between the far side of your fork and the fork mount before you finish pushing the skewer through and screwing it tight.
SeaSucker Cable Anchor
Don’t let some jerk steal your bike! Since SeaSucker bike racks aren’t bolted on to rooftop bars, we came up with a way to keep your bike safe. A Cable Anchor is just what it sounds like – an anchor point to securely connect a cable loop to your car. The Cable Anchor – Window, slides over the glass and rolls up into the window frame. Each is made of polished stainless steel and has a wide 1.375-inch hole to thread a cable lock through. The Cable Anchor - Window, is not recommended for tinted windows.
SeaSucker Compact Rear Wheel Strap
On the off chance our standard 6-inch Rear Wheel Strap cup (provided with the Talon, Mini Bomber or Bomber) doesn’t fit the space available on your car, we offer a more compact version with our smaller 4.5-inch SeaSucker vacuum pad. The Compact Rear Wheel Strap does NOT have the cupped rear wheel housing that comes standard with the regular Rear Wheel Strap. The strap is 22 inches and will fit most fat bike tires.
SeaSucker Flight Deck
The Flight Deck turns your regular old Rear Wheel Strap into a front-wheel holding superstar. It can be used with the Talon, Mini Bomber or Bomber, and uses the existing Rear Wheel Strap as part of the package. The front wheel mount features elongated entry slots for the wheel’s skewer that allow the wheel to rest on the platform of the rack, providing additional stability when driving. The .25-inch aluminum front wheel mount fits up to a 29? wheel and sits on a black HDPE platform. Made for standard road, cross and MTB wheels. Requires the MTB Plugs to hold a 12/100mm or 15/100mm through-axle. NOTE: this product is incomplete on its own - it MUST be combined with an existing Rear Wheel Strap to work. Approx. 13?x6? footprint.
SeaSucker Komodo
2019 Komodo, the most beautiful bike rack in the world? We certainly think so. This road-bike-specific rack is machined out of solid aluminum so that each part fits with precision. Anodized in a variety of colors; Black, Silver, Aqua Blue, and Gold. This rack is designed for sports cars and convertibles – cars that don’t have a lot of open space to attach a rack, but this beauty can be used on any car. - Minimum footprint: 18-inch x 13-inch. - Tail folds up for compact storage. - Each of the four individual vacuum cups articulates so the rack makes a solid connection even with irregular mounting surfaces. - Sorry, mountain bike lovers, Seasucker doesn't have a version of the Komodo for you yet.
SeaSucker Paddle Board Rack
Paddle boards, surfboards, even kayaks are no problem for this unit. Seasucker has put extendable bars (24-inch to 44-inch range) on their super-strong 6-inch SeaSuckers to make a roof-top rack system that holds it all. The front bar has two SeaSuckers on each side, and the back has one SeaSucker on each side, so you know you’ve got a solid connection with this rack. Comes with 22-inch wrap-around pads on each bar and two 10-inch straps for lashing down your boards, plus a spare SeaSucker (just in case) and a 5g serving of Lube Tube for maintenance. Some assembly may be required.
SeaSucker Rear Wheel Mount With Strap
This is a single 6-inch SeaSucker vacuum mount with a 1 1/2-inch wide hook-and-loop strap. When mounted to your vehicle it secures your bike's rear wheel and keeps the bike from moving left or right.
SeaSucker Rear Wheel Strap
6-inch SeaSucker with a 1.5-inch wide hook-and-loop strap to secure your bike’s rear wheel and keep it from moving left or right when driving. This item comes standard with the Talon, Mini Bomber and Bomber bike racks – it does not need to be ordered separately.
SeaSucker Ski Rack
Our Ski Rack is the easiest way to get your gear to the mountain. Powerful 6-inch SeaSucker vacuum mounts hold the front and a back locking carriers and are hinged to accommodate the curve of your roof for easy mounting. Soft rubber padding inside the carriers safely grip your skis or snowboards without scratching them. Each carrier section locks closed (2 keys included) and has a large push button for easy opening. Each carrier has 24-inch of holding space.
SeaSucker Trike Rack
We made this one especially for you three-wheelers. Two platforms with wheel hooks plus a wheel strap for the rear wheel holds the trike secure on a car’s roof. Like all SeaSucker racks, it attaches and removes in seconds and fits on virtually any car (except convertibles, you really need a roof to attach this one to). What’s in the box: - Two trike platforms with wheel hooks. - Rear Wheel Strap. - 5g Lube Tube for vacuum pump maintenance. - Spare SeaSucker vacuum mount.
Yakima Holdup Wheelstrap
$3.30
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima CoreBar EndCaps
$4.40
Pair of EndCaps for Yakima CoreBar.
Yakima JetStream EndCaps
$4.40
Pair of EndCaps for Yakima JetStream bars.
Yakima Boa Wheelstrap
$7.70
Rear wheel strap for Boa bike mount. Includes one strap.
Yakima World Strap
$7.70
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Yakima Chain Straps
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima End Caps
$12.00
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima Fat Straps
$12.00
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Yakima Getaway Hitch Lock
$16.50
Body for HitchLock. Requires SKS lock core. (Sold Seperately)
Yakima LongArm Pad
$19.00
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Yakima SKS Accessory Lock Housing
$19.00
Yakima's SKS Accessory Lock Housing is a great way to make sure your bike and luggage mounts stay put. It works with Yakima's SKS lock cores (Same Key System; sold separately) so that you only need to keep track of one key for all your rack-security needs. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately
Hollywood Racks Fork Block
$19.99
For transporting or storing your bike, Hollywood's Fork Block is the accessory you need. With a stout 9mm-diameter skewer that firmly grips your fork and a heavy-duty base that bolts to any solid surface, you can have a rack anywhere you need one.
Yakima Glass Hatch Hooks
$20.00
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Yakima SmarT-Slot Kit 1
$20.00
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Yakima Smart-Slot Kit 2
$20.00
Go super sleek with this low-profile conversion kit that lets you mount your FatCat or FatCat EVO to T-slotted crossbars, such as Yakima's JetStream bars. PRODUCT DETAILS - Custom-designed for Yakima FatCat and FatCat EVO snowsports mounts - Quick and easy installation - Includes slide in T-bolts and low-profile spacers - Works with our JetStream bars, FlushBar, RailBar, and most other t-slot style crossbars TECHNICAL SPECS - Weight: 0.30 lbs - Dimensions: L 0.75in x W 0.75in x H 2.00in
Page 1 of 7 Next page