Stainless steel pedal washers - Sold in pairs
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
- Replacement seat clamp bolt, nut, and washer for Thomson Elite Dropper seatposts - Compatible ONLY with Thomson Elite Dropper posts
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
Replacement endplugs for Ergon's GD1 grips. Three colors available that are matched to the SMD2 Comp saddle. - Uses: downhill, freeride, gravity disciplines
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA. - ISIS-compatible - M12
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
Use these to shim All-City's cross levers down from 31.8mm to 26.0mm. - Adapts down to fit 26.0mm road, cross, or drop bars - For use with All-City Cross Levers with 31.8mm bar clamp - Sold as a pair
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X2 stems
Thomson Faceplates are compatible only with Thomson stems. Compatible only with X4 stems
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut
The perfect bike fit is priceless. These FSA Polycarbonate Headset Spacers, however, are very affordable, and an easy way to dial in that fit for optimum performance and comfort.
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
Features - Chromoly spindle - Toe clip compatible
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a Removable reflector for mounting prior to purchase - Includes mounting hardware. Note metal plate may not be required during installation.
Protect the heart of your bike with this FSA BB30 MTB Bearing Cover Kit, and keep your drivetrain cranking smoothly no matter how rough the trail gets.
This is an FSA Self-Extracting Left Crank Arm Bolt for Mega Exo ATB Cranks - 30mm long - 14g - Designed to fit FSA ATB cranks only - Includes M18 bolt, M27 self-extracting cap and washers
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Candy 7 & 11 - Model years 2016 – present
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
This is an FSA Self Extracting Crank Bolt for Hollow Carbon MegaExo Light Cranks - Designed to fit hollow carbon FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers
The Keo Cover protects your cleats while walking. They are compatible with all Keo Grip cleats and Keo Cleats. – Cleats protection – Anti-slip – Compatible with all cleats
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
Page 1 of 4 Next page